Size Nominal size of sling = width mm 24 ply warp, fine cords, 2 ply weft, fine cords Sling WLL in tonnes 1.9 3.0 4.5 6.0 8.1 10 13 21 32 48 1.7 2.7 4.0 5.3 7.1 9.0 12 19 28 43 1.0 1.6 2.3 3.1 4.1 5.2 7.0 11 17 25 20.4 32.0 47.6 63.2 85.0 107 143 228 340 510 5 7 8 10 11 12 14 17 20 25 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.5 8.0 10.0 0.4 0.6 1.0 1.3 1.6 2.1 2.7 4.3 6.9 10.3 32 38 52 62 70 76 102 120 150 170 10.2 16.0 23.8 31.6 42.5 53.4 71.4 114 170 255 Cradle lift Included angle at the hook Proof load Flat Cable Thickness mm Generic cord size mm Weight Kg/m Woven jacket nom. dia WLL in single fall kN <30 deg 60 deg 120 deg Straight pull in single fall 50 64 76 88 100 112 125 160 200 250 1-A 1-B 1-C FLAT WOVEN SLINGS - TYPE 1 (Cradle Lift) Working Load Limits of Flat Woven Slings - Type 1 Type 1 - Cradle Lift Applications - Typical Configurations Design Number Graphic representation of sling Description and usage U Termination both ends. This provides the slimmest woven steel sling. Slides easily under loads. Made from machine woven flat cables. For general lifting of bundles of tubes, bars, timber, roofing steel in cradle lift. U Termination one end and lapped eye with ferrules on the other end. Economical sling with slim end to slide easily under loads. Made from machine woven flat cable and used for general work. End with ferrules remains on the crane hook during rigging. Lapped eye with ferrules both ends. Lowest cost sling where clearances under loads are adequate. Made from machine woven flat cable. For general lifting of steel bars etc. in cradle lift. Type 1 - Cradle Lift Standard - WLL - Designs # 1-A, 1-B, 1-C Woven flat cable Cradle lift Sling Type 1-B Included angle must not exceed 120 deg. kN *Note - Type 1-A & Type 1-B up to 160mm 20
RkJQdWJsaXNoZXIy MTI3ODI1