Holyoake

6 Flangeless Ceiling Slot Diffuser CSDP Series installation The CSDP mounting frame (CSD-MF) is a base frame which is designed to be built into a solid ceiling. Once the frame has been installed the CSDP is then inserted into this mounting frame. The CSD-MF offers a vastly improved alternative to the standard method of CSD installation. This system will not only save time for all of the contractors involved (HVAC, ceiling erectors, plasterers etc.) but will also give a much higher standard of finish than was typically able to be achieved. Normally ceiling slot diffusers are one of the most difficult supply diffusers to install into a solid ceiling. During the process of installation it is not uncommon for both the plasterer and the painter to have to carry out remedial work to ensure a reasonable standard of finish is achieved. All of this work is obviously detrimental as it takes time and often damages the linear diffuser and contributes to the poor overall appearance of the CSDP. The CSD-MF is installed as part of the solid ceiling grid system. This allows the supply air boots to be installed when there is clear access to the ceiling space and there is no danger of damaging the high quality finish of the CSDP. When it is time to line the ceiling, the ceiling erector has a slot to slide the gib or plaster sheet into. The plasterer can now Stop and Fill the ceiling sheets, then the painter is free to paint the entire ceiling. The CSD-MF has many design features that enable a faultless CSD installation. The mounting frame is equipped with a flexible edge which is fastened to the adjacent steel or wooden ceiling battens, whichever is used. This fexible edge allows for any discrepancies in the ceiling itself. If the flexible edge does not take up any discrepancies in the ceiling, the solid main section of the frame remains rigid to provide an accurate slot for the CSDP. With these features, the use of the CSD-MF will not only save time in installing the CSDP, but will also result in a much higher standard of finish for the project. The CSD mounting frame (CSD-MF) is a base frame which is designed to be built into a solid ceiling. Once the frame has been installed, the CSDP is then inserted into this mounting frame.